Search

Porsche 2009 GT3 RSR

Posted by Kimberly on Friday, January 23, 2009


Porsche recently unveiled its latest GT2-class racing car, the GT3 RSR.

The GT3 RSR is powered by a rear mounted six cylinder engine with displacement now up to 4-liters to the 3.8-liter of last year. What is baffling is that last years car produced 465hp@8000 rpm but this years car puts out 450hp@7,800rpm, the difference is not much and it could be down to sacrificing power for reliability. Torque is the same as last year at 430Nm@7,250rpm.

The rev limiter kicks in at 9000, and Porsche says that the new car’s torque curve is better-optimized than the outgoing car’s.

Technical Description Porsche GT3 RS

Engine:
Water-cooled, six-cylinder boxer engine; four valves
per cylinder; dry sump lubrication; individual throttle
butterflies; fuel injection; air restrictors 2 x 29.5 mm.

Bore:
102.7 mm

Stroke:
80.4 mm

Capacity:
3,996 cc

Power output:
331 kW (450 bhp) at 7,800 rpm

Max. Torque:
430 Nm at 7,250 rpm

Max. revs:
9,400 rpm

Transmission:
Six speed gearbox with sequential jaw-type shift;
oil/water heat exchanger; single-mass flywheel;
hydraulic disengagement lever; three-plate carbon-fibre
clutch; rear wheel drive; limited-slip differential 45/65%.

Body:
Monocoque body (basis GT3 RS) of hot-galvanised steel;
aerodynamically optimised front end with front spoiler;
aerodynamically optimised front underfloor; adjustable
rear wing; 90-litre safety fuel tank with fast filling function;
air jack; welded-in safety cage; bucket-type racing seat
(on driver’s side only) with flame-resistant seat cover;
six-point seat belt adapted for use of the HANS
Head and Neck Support; electric fire-extinguishing system.

Suspension:

Front:
McPherson spring strut axle; Sachs four-way gas
pressure dampers; double coil springs (main and ancillary
spring); front axle arms adjustable for camber; adjustable
sword-type anti-roll bar on both sides; power steering.

Rear:
Multi-arm axle with rigidly mounted axle sub-frame;
Sachs four-way gas pressure dampers; double coil springs
(main and auxiliary spring); rear axle tie-bar reinforced
and infinitely adjustable; adjustable sword-type anti-roll
bar on both sides.

Complete suspension infinitely adjustable (height,
camber, track).

Brakes:
Brake system with balance bar control.

Front:
Single-piece six-piston aluminium fixed callipers;
inner-vented, 380 mm in diameter; racing brake pads.

Rear: Single-piece four-piston aluminium fixed callipers;
inner-vented, 355 mm in diameter; racing brake pads.

Wheels:

Front:
Three-piece BBS light-alloy wheels (11J x 18-34);
central bolt;

Rear:
Three-piece BBS light-alloy wheels (13J x 18-12.5);
central bolt.

Electrical System:
Motec display with integrated data recording; multi-function
display with integrated gearshift indicator; adjustable
traction control; battery: 12 volt, 50 Ah, 140 Ah alternator.

Weight:
Approx. 1,220 kg complying with A.C.O. regulations,
1,245 kg complying with FIA regulations.

source:zerotohundred

{ 0 comments... read them below or add one }

Post a Comment